1）選擇滲透型界面防水劑，該材料具有超強滲透性，還具有優秀粘結性，能戰勝無機滲透型防水劑只有滲透性沒有粘結性的瑕玷，避免屋頂防水層發生剝離現象，該材料超出滲透型防水劑的標準要求。
1) choose the interface JBS-1500 interface type waterproofing agent permeability waterproof agent, the material has strong permeability, has good adhesion, inorganic waterproof agent can overcome the osmotic permeability of bonding not only to avoid the disadvantages of waterproof layer peeling, the material goes beyond the requirements of T1018-2006 permeable waterproof agent JC/ standard.
2）選擇涂膜屋頂防水涂料即JBS道橋用聚合物改性瀝青屋頂防水涂料（PBⅡ）手機網站建設，該產品吻合中華人民共和國交通部JC/T975-2005標準的要求。是參加國家“道橋用屋頂防水涂料”JT/T535-2004及JC/T975-2005兩個標準的緊張依據產品。該產品耐低溫-40℃，耐高溫達到180℃，延長性可達800%（遼寧人事考試網），具有耐老化、抗硌破、易操作、成本低等好處，優于其它屋頂防水材料。
2) polymer modified asphalt waterproofing coating for selection of coating film waterproof paint JBS bridge (PB II), the product conforms to the JC/T975-2005 standard requirements of the People's Republic of China Department of transportation. Is to participate in the national "bridge with waterproof paint" JT/T535-2004 and JC/T975-2005 two standards are an important basis for the product. The product has low temperature of -40 DEG C, high temperature reached 180 degrees, extending up to 800%, has anti-aging, anti crack, easy operation, low cost, better than other waterproof materials.
3）選擇橋面防水層加強材料，用無堿短纖維（長度5-15mm），防水層抗穿刺性能比較好，達到標準GB/T18369規定要求。
3) the choice of bridge deck waterproof layer reinforced materials, with no alkali short fiber (length 5-15mm), waterproof layer of anti puncture performance is better, to meet the requirements of the standard GB/T18369.
